1. NiAl基金属间化合物多晶和单晶合金的力学性能研究;陈健; 郑启; 唐亚俊; 胡壮麒;航空材料学报,1996/03,
2. 纤维共晶生长界面前沿三维扩散场解析;姚向东; 胡壮麒; 黄韬; 周尧和;材料研究学报,1996/02,
3. 稳态层片共晶长生模型——Ⅰ.理论分析;姚向东; 黄韬; 周尧和; 胡壮麒;自然科学进展,1996/06,
4. 氢在镍基单晶高温合金中的扩散和溶解;吴秋允; 张静华; 孙秀魁; 胡壮麒;金属学报,1996/09,
5. 热处理过程中纳米非晶Si-N-C粉的晶化及微结构变化研究;李亚利; 梁勇; 郑丰; 肖克沈; 胡壮麒;无机材料学报,1996/01,
6. 基于镶嵌原子势的纯Al快速凝固过程分子动力学模拟;李小平; 韩其勇; 刘洪波; 陈魁英; 胡壮麒;材料研究学报,1996/04,
7. NiAl-TiC内生复合材料的高温拉伸行为;邢占平; 郭建亭; 于立国; 胡壮麒;金属学报,1996/10,
8. Si对In718合金凝固过程及元素偏析的影响;孙文儒; 郭守仁; 卢德忠; 胡壮麒;航空材料学报,1996/02,
9. 过冷液态Mg70Zn30合金微观结构的分子动力学研究;陈魁英; 刘洪波; 金朝晖; 胡壮麒; 李庆春;自然科学进展,1996/01,
10. 平衡相对8090Al-Li合金力学性能的影响;张万明; 张匀; 胡壮麒; 刘玉林; 赵洪恩;金属学报,1996/05,
11. 粗真空条件下锡基钎料与Sialon陶瓷的润湿和连接;庄艳歆; 冼爱平; 王仪康; 张修睦; 胡壮麒;金属学报,1996/07,
12. 电流体动力学技术制备纳米超微粉的液滴破碎机理;于溪凤; 颜旭; 刘祥; 胡壮麒;材料研究学报,1996/04,
13. 界面结构对纳米镶嵌颗粒熔化行为的影响;生红卫; 卢柯; 胡壮麒; 任罡; 彭练矛;材料研究学报,1996/01,
14. 压力对非晶(Fe0.99Mo0.01)78Si_9B13晶化相a-(Fe,Mo)晶粒尺寸的影响;姚斌; 华中; 闵春宗; 王爱民; 刘浩哲; 丁炳哲; 胡壮麒;金属学报,1996/08,
15. 急冷Cu30Al70合金的结构及催化特性;孙笠; 宋启洪; 胡壮麒;金属学报,1996/04,
16. 高温高压对Ti基复合材料中原位合成TiC增强颗粒尺寸的影响;刘浩哲; 姚斌; 王鲁红; 王爱民; 丁炳哲; 胡壮麒;稀有金属材料与工程,1996/05,
17. 静高压下有表面化学反应的非晶合金晶化研究;姚斌; 隋桂玲; 王爱民; 李宏; 丁炳哲; 胡壮麒;物理学报,1996/05,
18. 电流体动力学技术制备纳米超微粉的研究;于溪凤; 程力智; 胡火生; 刘祥; 胡壮麒;金属学报,1996/01,
19. 8090 Al-Li合金中δ'相的析出长大行为;张万明; 张匀; 胡壮麒; 刘玉林; 赵洪恩;金属学报,1996/10,
20. NiAl-Fe金属间化合物合金的正电子寿命谱;熊良钺; 陈健; 胡壮麒;金属学报,1006/11,
21. 静高压在多层Al/Fe-Mo-Si-B纳米合金复合材料制备中的作用;姚斌; 王爱民; 丁炳哲; 胡壮麒; 幸志明; 耿义志; 隋桂玲;自然科学进展,1996/01,
22. Xue X M, Jiang H G, Sui Z T, Ding B Z, Hu Z Q. Influence of phosphorous additionon the surface tension of liquid iron and segregation of phosphorous on the surface of Fe-Palloy. Metall. Mater. Trans., 1996, B27: 71~79
23. Fan G J, Quan M X, Hu Z Q. Mechanically induced structural relaxation in anamorphous metallic Fe80B20 alloy. Appl. Phys. Lett., 1996, 68: 319~321
24. Liu Z G, Guo J T, Hu Z Q. Mechanical alloying and characterization of Ni50Al25Ti25.J. Alloys Compds., 1996, 234: 106~110
25. Yao B, Ding B Z, Sui G L, Wang A M, Hu Z Q. Effect of high pressure on thepreparation of Pd-Si-Cu bulk nanocrystalline materials. J. Mater. Res., 1996, 11: 912~916
26. Fan G J, Quan M X, Hu Z Q, Li Y L, Liang Y. On the mechanically driven rapidcrystallization of amorphous Si3N4 ceramics. Appl. Phys. Lett., 1996, 68: 915~916
27. Sheng H W, Ren G, Peng L M, Hu Z Q, Lu K. Superheating and melting-pointdepression of Pb nanoparticles embedded in Al matrix. Phil. Mag. Lett., 1996, 73: 179~186
28. Zhao X Q, Liang Y, Hu Z Q. Investigation on the martensitic transformation inγ-Fe(N) nanoparticles. Nanostructured Mater., 1996, 7: 313~325
29. Hu Z Q, Wang H M, Zhang J H, Tang Y J, Guan H R. Nonequilibrium solidificationin single crystal Ni-based superalloy. Inter. Symp. on Metallurgy and Mater., of NonferrousMetals and Alloys, Shenyang, 1996. 400~409
30. Fan G J, Quan M X, Hu Z Q. Induced magnetic anisotropy in Fe80B20 metallic glassby mechanical milling. Appl. Phys. Lett., 1996, 68: 1159~1161
31. Lou T P, Ding B Z, Gu X J, Li G S, Hu Z Q. Mechanical alloying of Fe-Nb-Cmaterials. Mater. Lett., 1996, 28: 129~132
32. Jin Z H, Chen K Y, Lu K, Hu Z Q. Short-range order in liquid Na-Cd alloys. J. Phys.Condens. Matter, 1996, 8: 8105~8119
33. Lu G, Guo J T, Chen K Y, Hu Z Q. A first principles investigation of environmentalembrittlement of Co3Ti alloy. Acta Mater., 1996, 44: 4019~4026
34. Zhao X Q, Liang Y, Hu Z Q, Liu B X. The oxidation behavior and magneticproperties of iron carbonitride ultrafine particle. J. Mater. Res., 1996, 11: 2689~2692
35. Sheng H W, Xu J, Yu L G, Sun X K, Hu Z Q, Lu K. Melting process ofnanometer-sized In particles embedded in an Al matrix synthesized by ball milling. J. Mater.Res., 1996, 12: 2841~2851
36. Li D J, Wang A M, Yao B, Ding B Z, Hu Z Q. Synthesis of bulk nanocrystallineTi-Cu alloy by pressure-quenching method. J. Mater. Res., 1996, 11: 2685~2688
37. Hu Z Q, Sun W R, Guo S R. Effect of P, S and Si on the solidification segregationmicrostructure and mechanical properties in Fe-Ni base superalloys. Acta Metall. Sin., (Eng.Lett.,), 1996, 9: 443~452
38. Fan G J, Quan M X, Hu Z Q. Deformation-enhanced thermal stability of anamorphous Fe80B20 alloy. J. Appl. Phys., 1996, 80: 6055~6057
39. Fan G J, Song X P, Quan M X, Hu Z Q. Explosive reaction during mechanicalalloying of the Si/PbO system. Scr. Mater., 1996, 35: 1065~1069
40. Zhang W Q, Yang Y S, Liu Q M, Zhu Y F, Hu Z Q. Numerical simulation of fluidflow in electromagnetic centrifugal casting. Modelling Simul. Mater. Sci. Eng., 1996, 4:421~432
41. Li J M, Quan M X, Hu Z Q. Preferential precipitation sequence of metastable phaseduring crystallization of (Fe0.99Mo0.01)78Si9B13 metallic glass. Appl. Phys. Lett., 1996, 69: 2356,2357
42. Li J M, Quan M X, Hu Z Q. Spectra investigation on the effective magneticanisotropy of nanocrystalline Fe89Zr7B4 soft magnetic alloys. J. Appl. Phys., 1996, 79:8850~8852
43. Li G P, Liu Y Y, Li D, Hu Z Q. HREM study of the nucleation of rare earth-rich phase particle in melt-quenched Ti-5Al-4Sn-1Mo-0.25Si-1Nd alloy. J. Mater. Sci. Lett., 1996,15: 1003
44. Jin Z H, Chen K Y, Lu K, Hu Z Q. Short-range order in liquid Na-Cd alloys. J. Phys.Condens. Matter, 1996, 8: 8105~8119
45. Li Q M, Jiao Y N, Yang Y S, Hu Z Q. Theoretical analysis of the particle gradientdistribution in centrifugal field during solidification. Metall. Mater. Trans., 1996, B27:1025~1029
46. Sheng H W, Ren G, Peng L M, Hu Z Q, Lu K. Superheating and melting-pointdepression of Pb nanoparticles embedded in Al matrices. Phil. Mag. Lett., 1996, 73: 179~186
47. Li H, Lou T P, Zhou X, Guo W Q, Zhai G J, Hu Z Q, Ding B Z. Wettability ofmolten metal drop above or below substrate. Microgravity Q., 1996, 6: 109~113
48. Yao B, Guo H C, Wang J, Ding B Z, Li H, Wang A M, Hu Z Q. Influence of pressureon the grain sizes in the crystallization process of an amorphous Fe-Mo-Si-B alloy. Physica B,1996, 228: 379~382
49. Yao B, Hao Y Y, Wang A M, Guo W Q, Ding B Z, Liu H Z, Hu Z Q. Study of thethermodynamic mechanism of the crystallization of amorphous Fe-Mo-Si-B alloy with adiffusion reaction at the surface. J. Non-Crystalline Solids, 1996, 205-207: 554~558
50. Lou T P, Ding B Z, Gu X J, Li G S, Hu Z Q. Mechanical alloying of Fe-Nb-Cmaterials. Mater. Lett., 1996, 28: 129~132
51. Li G P, Li D, Liu Y Y, Guan S X, Wang Q J, Hu Z Q. Microstructure ofsecond-phase particles in high-temperature Ti-55 alloy after creep. Mater. Characterization,1996, 37: 183~186
52. Ye L L, Liu Z G, Quan M X, Hu Z Q. Different reaction mechanisms duringmechanical alloying Ti50C50 and Ti33B67. J. Appl. Phys., 1996, 80: 1910~1912
53. Ye L L, Huang J Y, Liu Z G, Quan M X, Hu Z Q. Effect of nickel addition on thecombustion reaction of the Ti-C system during mechanical alloying. J. Mater. Res., 1996, 11:2092~2097
54. Li J M, Quan M X, Hu Z Q. Spectra investigation on Hall-Petch relationship innanocrystalline Fe78Si9B13 alloy. Appl. Phys. Lett., 1996, 69: 1559~1561
55. Xu R, Cui Y Y, Xu D M, Li D, Li Q C, Hu Z Q. Microstructural development of agas-atomized and hot-pressed super-α2 alloy. Metall. Mater. Trans., 1996, A27: 2221~2228
56. Meng C G, Guo J T, Hu Z Q. Relationship between bonding characteristics andmechanical properties of L12 intermetallics. J. Alloys Compds., 1996, 237: 139~143
Copyright © 2017 胡壮麒.皖ICP备100998673号. All Rights Reserved. Designed by Wanhu